Instructions for DIY Lashes




  1. Prep the lashes: Using your stainless steel tweezers, remove the lash segment from the card. Remove any adhesive stuck to the bottom from the card. Use your scissors to trim the cluster lashes to the desired length. Make sure they fit the shape of your eye and don't extend too far out.
  2. Apply Adhesive: Use your stainless steel tweezers to hold the tip of the cluster, and use the applicator brush striking downward on the cluster to form a bubble of adhesive. 
  3. Place the lashes: Use the same tweezers to carefully place the cluster lash underneath the natural lash, close to the lash line. Hold it in place for a few seconds to allow the adhesive to dry.
  4. Repeat: Repeat the process, applying clusters of lashes along the lash line until you achieve your desired look.
  5. Set with sealant: Once you've applied all the clusters, use the sealant at the base of the lash to set the lashes in place. This will help them last longer and stay put.